Archive | Basic Skills RSS feed for this section

Wallet Ultralight Alcohol / Esbit Stove

11 Aug

This is kind of a cool idea. This would make a nice backup stove especially for those who dual sport ride.


My latest project – The Wallet Stove My goal was to create a simple, ultra light, collapsible, multifuel camp stove burning either alcohol or esbit tablets and compact enough to fit in your wallet. Plans are at: tinyurl.com I used an aluminum basket from my turkey fryer as the source of the sheet metal; hence the holes seen in the uprights of the stove. Esbit – 16oz Water Boil Time: 6:35 Burn Time 11:13 Tealight w/ denatured alcohol – 16oz Water Boil Time: 10:15 Burn Time 10:30 Explore Your Potential by making your own gear. I know you can do it if I can. Too Late By Dusk can be downloaded at: www.archive.org

  • Share/Bookmark

Spotting While Off Road

27 Apr

Spotters are very important while overlanding. There will be times when you will be navigating very tough terrain with absolutely no idea where exactly your tires are on the trail. Now this is not a complete guide by any means. I saw the video below and felt it was important to point out. Now before you watch this short clip, I want to make the point that my opinion is just from what is seen in the video. I was NOT there. I am merely pointing out what I seen in the actual footage.

The above footage is a great example of what not to do. The spotter should be making hand movements that instill confidence. Not constant “wavy” movements. You want them to go left, point left firmly and hold that until that movement is over. To help the driver keep from being confused, the spotter should yell out “driver” and “passenger” while pointing in the correlating direction to help confirm to the driver what to do with confidence.

Also, the spotter should have a firm footing. Do not try and give direction while looking around for a footing. If you slip, you can easily misdirect the driver. Also make sure to stay within the drivers line of vision. In the above video example, the spotter moves “driver” and far away from the trail, causing the driver to look away from the trail. I know he was getting out of the drivers way in case of roll over, but he should have been on the passenger side. The spotter would have been in a uphill position with no chance to being injured by the vehicle and would still have been in the drivers line of sight.

  • Share/Bookmark

How NOT to Pull a Truck From Mud

10 Mar

This is another great example of what not to do! They tried to remove a Jeep Cherokee that was stuck in the mud. Full pulls later and the Jeep is done! I can not believe with that many people standing around, there was not one smart one among them.

Caution: There is some foul language around the two minute mark.

  • Share/Bookmark

Cooking on my storm kettle

16 Dec

This is a great tip for those with a storm kettle. Great way to have a cheap stove from equipment you may already carry.


I made a thin strip of perforated steel to sit in a ring around the base of my storm kettle to see if I could cook on it.

  • Share/Bookmark

How to Choose a Backpack

5 Nov

Your backpack will probably be the single most important purchase you will make before hitting the road. It can be your best friend or worst enemy, depending on which one you pick. With that in mind, here are a few pointers to consider when choosing one.

Size IS Important

Before choosing a pack, have an idea of what’s going to go in it. Visualise the contents, understand your needs, and shortlist a range of rucksacks accordingly. The shortlist should contain rucksacks big enough for the largest loads you will carry, but no bigger – as the larger the pack, the more you may be inclined to fill it. But don’t go too small either, as an overloaded pack may feel uncomfortable and unstable, and may force you to have to secure extra gear on the outside thus increasing the risk of loss or damage.

The choices on offer can be put into the following categories:-

Daypacks (15 – 35L) – Small packs with minimal or no internal frame to support loads, so all weight is transferred through shoulder straps. Perfect for day trips and shorter outings.

Alpine Packs (35 – 55L) and Backpacking Packs (55 – 75L) – This will be the area to concentrate in for a backpacking or RTW trip. If possible, the smaller alpine pack. Both offer many of the comprehensive features of larger rucksacks whilst keeping physical weight and size to a minimum.

Expedition Rucksacks (75 – 100L) – These packs are huge. Possibly necessary for trips involving many climate changes for those wishing to carry all their gear from the word go, or for those wishing to practice for SAS Selection! If you fill one of these remember that you may and up carrying mucho, mucho Kilos…

Travel Packs – Essentially, these are like soft suitcases with shoulders straps that can be covered (to avoid snagging when not being carried). They are most certainly an option to consider, as these front opening packs make it easier to access your gear compared to conventional top-loading rucksacks. They may also engender a greater air of respectability if checking in to hotels or at border crossings. The downside is that they are generally a little more expensive and also bulkier than their rucksack equivalent.

Fitting

Ensuring the pack is a good fit is of paramount importance. If possible, try each pack with some weight in. It may feel quite different. Fill up the pack with weight approximate to that you would be carrying, distributing it as best you can. After you have achieved a good fit be sure to test drive the pack a little. Lean forward, backward, and also sway from side to side. The pack should remain snug, and not swing wildly or throw you off balance.

Walk around with it – even up and down some stairs if possible. Concentrate on ensuring yourself that the weight is being distributed evenly. Be aware of any minor niggles, as these will become painfully apparent after several hours on your feet with a heavy pack on a hot day.

What to Look For

Shoulder Straps – Focus on packs with wide, well padded (yet firm), shoulder straps. Ensure that the straps keep the pack central and well balanced, that they don’t slip (a good, solid chest strap should help with this), and that they keep the pack snug yet don’t chaff or restrict arm and upper body movement.

Hip Belt – Often overlooked, a good Hip Belt is essential. It should be strong enough to bear the main pack weight as it will, when used properly, transfer the weight from your back to your hips, thus considerably increasing comfort and reducing back strain when wearing the pack for prolonged periods of time. Ensure that the band is semi rigid, and that it has soft, broad padding so to avoid creating pressure points that will all too quickly become very painful. On large packs, the hip belt is the main load-bearing component, so remember to use it – it makes a world of difference.

Other Straps – Side compression straps come highly recommended. After the rucksack is packed, these can be pulled tight to further reduce the size of your pack. It may make the difference between being able to have it as carry on luggage for flights, fitting it overhead luggage compartments on busses, and actually being parted with it on other such journeys. They also serve to increase pack stability by holding the load closer to your back.

Pay attention to the types of adjustments on these straps, too. Can they be adjusted whilst wearing the pack? Are they difficult to adjust? Inversely, do they adjust too easily and will therefore change when I don’t want them too?

Also look out for other types of adjustments. Although they may seem surplus to requirements at the moment, they will enable the wearer to further fine tune how the pack sits and feels at a later stage.

Pockets – Ensure there are enough pockets for your needs. Lid pockets are especially useful for carrying items that need to be accessible in a hurry – such as guidebooks, for instance. Mesh pockets (usually located either side near the bottom of the pack) are great for holding wet gear should you be fresh out of those handy plastic bags. Outer side pockets are also exceptionally handy for storing items that you want quick access to whilst travelling – or when your rucksack is half buried in other luggage – and are large enough to accommodate substantial items such as water bottles and tasty road-nibbles. In general, pockets allow for a better separation of your gear. If you like a modicum of organisation, including somewhere separate to put your skanky pants, you can never have too many pockets.

Compartments – If you opt for a top loading pack then it’s advisable to choose one with at least two, separately accessible, compartments – thus providing access from both the top and the bottom of the pack. This arrangement is ideal if packing/unpacking is a regular occurrence, as you can put your most used items in one compartment, and makes for a good compromise if you were also considering the purchase of a Travel Pack. You may also find that internal diaphragms separating the two can be unzipped to accommodate larger items if need be.

Top Flap – If opting for a top loading pack then look for a top flap that will extend if need be. It’s a must-have for those temporary overloads and can always be used to stuff extra little bits under when your rucksack is already packed and secured.

Back Pads and Stays – These days, rucksacks generally come with a padded back piece as standard, although better quality versions will also have ventilation features built in. Ergonomic, raised ribs of foam will allow better airflow between the carrier and the rucksack. This airflow means greater comfort, less sweat, and a smaller laundry pile after a few days of overland travel.

Lightweight, aluminium stays fitted in the rucksack (sometimes removable) maintain backpack shape and ensure good weight transfer between the shoulders and the Hip belt. Some versions are smaller, and therefore less intrusive, than others and will come pre-curved thus providing greater comfort.

Durability – Take a closer look. Check for durable, waterproof/water resistant fabrics and tightly stitched seams. Pay particular attention to where straps fix to the main body. Pull the seams apart, and be wary if stitching becomes clearly visible. Ideally, internal seams should be covered by fabric as it will make them less prone to wear. The base should be constructed from an incredibly durable material – or at least the same material as the body of the pack but double lined or double thickness – as that’s the part of the pack which will be most prone to being scuffed and torn.

Ensure that all zippers and catches look up to the job. Try them all several times to get a feel for their durability and functionality. Are the zipper handles too small? Can I fit a padlock through them? Are there double zippers that meet in the middle in case one breaks? These are all things to consider.

The benefits of hitting the road with the right backpack cannot be underestimated. Sure, you can travel with almost any bag – I used to borrow packs, in fact. But a comfortable, well-fitting pack will not only be physically beneficial, but will make life a little easier in the long run.

Part-time Travel Writer and full-time Vagabond, Nathan Richards wants nothing more than to inspire and encourage others to satisfy their wanderlust.

He achieves this by regularly posting valuable travel tips and first hand travel narratives on his popular backpacking and travel writing website at www.ubertramp.com.

In addition to his work on Ubertramp and in other Travel Blogs, his articles have also been featured in Online Travel Magazines such as Budget Travel Online, Backpackers.com, Travelmag, and the BootsnAll Network.

  • Share/Bookmark

Basic Compass and Map Use

15 Oct

Basic Compass and Map Use

old map and watch

When getting into Overlanding, it is easy to get caught up in all the cool gadgets and tools. It is very important not to forget the basics. One of the most important basic skills is navigation. Here is a great article provided to us by The Compass Store that will help you get a great basic overview of this skill.

First, you need to determine your bearing (the direction you need to travel). Use the following procedure to obtain an exact travel direction towards your desired destination. The procedure will work if the magnetic North-South lines are drawn on the map.

1 a) Place the compass on the map so that the long edge connects the starting point with the desired destination.
b) Make sure that the direction arrows are pointing from the starting point to the place of destination (and not the opposite way).
c) At this point, you may want to use the scales on your compass (if available) to determine the distance you need to travel.
2 a) Hold the compass firm on the map in order to keep the base plate steady.
b)Turn the rotating capsule until the North-South lines on the bottom of the capsule are parallel with the North-South lines on the map.
c) Be sure that the North-South arrow on the bottom of the capsulepoints to the same direction as North on the map. It is here you will make adjustments for declination, if necessary.
3 a) Hold the compass in your hand in front of you.  Makesure that the base plate is in horizontal position, and that the direction arrows are pointing straight ahead.
b) Rotate your body until the North-South arrow on the bottom of the capsule lines up with the magnetic needle, and the red end of the needle points in the same direction as the arrow.
c) The directional arrows on the baseplate now show your desired travel direction.

Now that you have determined your necessary bearing, you need to make sure you maintain an accurate bearing. First, you should find a suitable target in the terrain (e.g., a tree, boulder or a bush) towards which the direction arrows point. Walk towards the chosen object without looking at your compass. When you reach your target, find a new object that is aligned with your bearing, and repeat the process.

Tip 2: Sometimes the compass capsule may get turned accidentally while you are walking. Remember to check from time to time that the capsule has not deviated from the direction that had been set on the compass.

Tip 3: Remember the difference between the magnetic needle that always points to the magnetic North Pole and the direction arrows that show the travel direction.

For more information on using a map and compass you may want to consider purchasing this 144 page instructional  compass book, Discover the Excitement.

A special thanks to The Compass Store and Suunto for providing the content for this useful page.

Here are some FAQ also answered by the great guys @ The Compass Store

If you don’t find the answers you are looking for here, you might
want to check out our learning section back on the home page.

What should I look for in a good compass?
How do I use a compass?
What is a reciprocal scale?
What is the compass mirror used for?
Do I need a Global Needle if I will only be in the US?
What are the “cotangent” tables on the KB-14 sighting compass used for?

  • Share/Bookmark

Powered by Yahoo! Answers

Bad Behavior has blocked 423 access attempts in the last 7 days.